Track Carriage Seamers

We are renowned as a Manufacturer and Supplier of Track-Carriage Seamers , based in Vadodara, Gujarat, India. The offered range is suitable for welding stainless steel pipes, vessels, etc. All the products are made under the guidance of our skilled professionals, by using the optimum quality raw material and advanced technology, as per the industry norms. Furthermore, the range of Track-Carriage Seamers is available to us at an affordable price.

Features of Track Carriage Seamers :

• Small floorprint, easy work-piece loading
• Suitable for carbon steel, stainless steel
• Suitable for longitudinal seam welding of big diameter pipe or barrels
• Suitable for TIG, MIG/MAG, PAW welding process
• Weld circumferential seams in cooperation with rollers and headstock

• High Precision TIG-Plasma or Plasma + TIG Longitudinal and Circumferential Seam Welding System
• Welding Process: TIG/PAW/P+T
• Material: Stainless Steel
• Diameter:  3200mm
• Length: 6500mm
• Joint Type: Longitudinal Seam, and Circumferential Butt or Overlap Seam

Features:

• Huaheng has more than ten years of Plasma application experience in terms of excellent welding process and service ability
• Mainly for vessels of thin-wall thickness less than and equal to 8mm , there is no need for beveling. It can weld single side with double side shaping. For wall thickness greater than 8mm, a little beveling is needed.
• Modular design, less modification design and production cycle
• The automatic welding system is specially designed for stainless steel application. With Plasma welding process, the key hole penetration effect makes sure one-side welding double-side shaping, as well as higher welding speed and higher welding efficiency
• The energy of arc is much concentrated that the heat effect zone is smaller, thus reducing distortion
• Turn-key project
• Using Plasma + TIG double torches welding at one time, Plasma for root pass at front, TIG for covering pass after, highly improving the welding quality and efficiency, which can reach 1.3~1.5 times the efficiency of single torch welding
• With the advantage of key hole penetration, there is no bevel with plate wall thickness of 8mm and below, saving time and money on preparation
• With the benefit of high efficiency, it can save the time of using plasma by 4~5 times as compared with manual welding

Stainless Steel Pipe
Information :

• Welding process: PAW, PAW+TIG, SAW, and various combinations for different thickness pipe applications Stainless pipes are comprehensively used in chemical, oil and gas, food, and papermaking industries etc.
• The continuous formation process uses single or multi-torch (PAW+TIG) welding process. UOE is suitable for big diameter thick-wall pipe, length=6m approximately.
• Stainless pipe manufacturer uses continuous formation process for OD<219mm thin-wall pipe application, and UOE process for OD>219mm thick-wall pipe application.
• For high standard requirement of internal seam, internal seam refusing process is recommended UOE process application
• Pipe diameter: OD219~OD1,200mm
• Welding length: <6,000mm, option for customization
• Pipe thickness: 4~14mm
• Material: SUS321, SUS304, SUS316, SUS316L etc. 

Specification :

Item	HLM5000	HLM6500
Maximum welding diameter (mm)	5000	6500
Column speed of up and down (mm/min)	560	560
Trolley speed (mm/min)	80~800	80~800
Dimension (LxWxH mm)	5800x1800x2500	7600x1800x2500
Weight (Ton)	1.6	1.9